Composite Deck Builder in Gloucester Township, NJ

This page covers Gloucester Township in Camden County, which includes Blackwood, Sicklerville and Glendora. It is not Gloucester County, and the two are easy to mix up. Upgryd is the custom deck builder for Gloucester Township clients who want a new composite deck built on a frame that outlasts the boards.

Our nearest published project is in Swedesboro, in Gloucester County: a new 12x20 deck set on helical piers, finished in Deckorators Venture Sandbar with a black aluminum Rapid Rail railing. Helical piers install quickly and do not heave with frost.

The township runs deck permits in two steps. A zoning permit with a survey comes first, then the construction application, with two sets of plans and an estimated cost stated at retail value. We prepare each piece in that order.

Recent nearby work includes a new 12x20 deck on helical piers in Swedesboro, NJ, in Deckorators Venture Sandbar with a black aluminum Rapid Rail railing.

Why Gloucester Township clients let Upgryd design the whole deck

Framing first. On new builds and frame rebuilds we build on #1 grade pressure-treated lumber rather than #2 grade, with butyl flashing tape at the ledger and butyl joist tape along every joist.

Footings that stay put. Helical piers are our choice where soil or a tight lot demands them, picture-frame construction finishes the edge, and surface-mounted structural posts hold the rail line true.

Permits without the runaround. The zoning application, survey, construction jacket and plan sets are assembled by us and filed with the township.

Support after the build. Your dedicated project manager walks you through an interactive proposal covering Deckorators, Trex and TimberTech, you inspect the deck before final payment, and a 25-year limited labor warranty follows from a builder licensed in NJ and PA that has earned 248 reviews.

From first walk-through to final payment in Gloucester Township

1. Consultation. We visit, measure the deck and yard, and test any existing frame during a free in-home consultation.
2. Design. Your interactive proposal lays out line-item scope, board and railing options, and financing.
3. Zoning permit. The township approves the zoning permit before it accepts a construction application, and the zoning application needs a survey showing your property lines. We prepare it, with the proposed deck located against those lines.
4. Construction application. The township's deck procedure calls for the construction jacket, a copy of the approved zoning permit, the building application with the estimated cost at retail value, our Home Improvement Contractor registration copy, and two sets of plans covering attachment to the house, footings, framing, guards and stairs. We prepare and file that set, then order materials and book crews.
5. Build. Framing and footings come first, then boards, rail and skirting. A new deck is typically done within one to three weeks of crew arrival, and a resurface wraps about four weeks after signing.
6. Handover. We walk every board and rail with you, final payment follows, and your warranty begins.

Gloucester Township permits, 30-inch footings and a Camden County winter

Township paperwork

Gloucester Township's Department of Community Development and Planning, at 1261 Chews Landing-Clementon Road, covers zoning and construction permits. Its deck procedure, revised in January 2025, starts with a zoning permit that must be approved and paid before the construction application. The construction package then needs the construction jacket, a copy of the approved zoning permit, the building application, and two sets of plans drawn, signed and sealed by an NJ registered architect or drawn and signed by the owner. When a contractor does the work, a copy of the NJ Home Improvement Contractor registration goes in as well.

The procedure sheet states that plans from box stores alone are not sufficient for plan review, and that the estimated cost must reflect retail value whether a contractor, a family member or the owner does the work, since a low figure delays processing. The township's sample deck sheet asks the plans to show deck height; footing diameter, depth and locations; beam sizes and spans; joist size, spacing and spans; post sizes and how they connect to footings and beams; the connection to the house; decking; guard type, height and baluster spacing; and stair construction. It adds that a deck may not be supported by a cantilever. The zoning application needs a land survey showing property lines, because setbacks decide what can be built and where. State rules call for a full permit when a deck is built or completely replaced.

Footings

New Jersey's code table places Camden County in the southern frost zone, which sets a 30-inch minimum frost depth. Our footings go below that line, and helical piers go in where the soil calls for them, as on our Swedesboro deck.

Weather

NOAA's 1991-2020 normals for the Somerdale 4 SW station list about 21.9 inches of snow and about 48.1 inches of precipitation a year. Wet winters with frequent freeze and thaw are hard on framing, which is why frame rebuilds go on #1 grade pressure-treated lumber.

Sources: glotwp.com, glotwp19.wpenginepowered.com (deck procedures), glotwp19.wpenginepowered.com (sample deck sheet), nj.gov, nj.gov, ncei.noaa.gov. Last verified November 2026; confirm current rules with the municipal office before you file.

Upgryd builds composite decks, deck resurfaces and covered porches in Gloucester Township, NJ, backed by a 25-year limited labor warranty. We install decking from Deckorators, Trex and TimberTech, projects start at $10,000, and you can call (973) 791-9910 or request a free in-home consultation online.